Cobalt Digital Inc BBG-1022-2FS Product Manual page 62

3
Table 3-2 BBG-1022-2FS Function Submenu List — continued
In this example, audio bus channels 1 thru 8 from each path are summed with the like-channel of the other path. These summed
outputs can then be outputted on any of the audio outputs. The output flex bus allows cross-sourcing from both Path 1 and Path
2 embedded internal Audio Bus sources to the Path 1 and Path 2 discrete output audio crosspoints.
Flex Mix 1
Flex Mix 2
1
Flex Mix
Flex Mix
2
Flex Mix 15
Flex Mix 16
8
Path 1
Path 2
Note:
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should be
set to the Silence selection.
• Flex Bus Input Channel Source/Bus
Assignment
• Gain / Mute Control
3-32
Output Flex Mix
Flex Bus A
3
4
Flex Bus B
To Path 1 / Path 2
•
Output Audio
• •
Crosspoints
Flex Bus P
Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Audio Bus Ch 1 thru Ch 16 (Path1 or 2)
• Tones (100 Hz thru 16 kHz)
• Downmix L or Downmix R (Path1 or 2)
The Flex Bus drop-down selects the bus (A thru P) to which the input is
assigned to.
Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
BBG-1022-2FS PRODUCT MANUAL
BBG-1022-2FS Function Menu List and Descriptions
Output Flex Mix – Provides a 16-channel mixer in which each of the
inputs can be mixed onto up to 16 independent output summing
nodes. The input sources include audio bus channels from the device
two embedded audio paths. Each input channel has independent gain
and mute controls.
BBG1022-2FS-OM (V1.3)