Table of Contents
Advertisement
3
Troubleshooting
Error and Failure Indicator Overview
3-78
This section provides general troubleshooting information and specific
symptom/corrective action for the BBG-1022-2FS and its remote control
interface. The BBG-1022-2FS requires no periodic maintenance in its normal
operation; if any error indication (as described in this section) occurs, use this
section to correct the condition.
The BBG-1022-2FS itself and its remote control provide error and failure
indications. Depending on how the BBG-1022-2FS is being used (i.e,
standalone or network controlled through DashBoard™ or a Remote Control
Panel), check all available indications in the event of an error or failure
condition.
The various BBG-1022-2FS device and remote control error and failure
indicators are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-80)
• BBG-1022-2FS Processing Error Troubleshooting (p. 3-81)
BBG-1022-2FS PRODUCT MANUAL
Troubleshooting
BBG1022-2FS-OM (V1.3)
Advertisement
Table of Contents
Troubleshooting
