Cobalt Digital Inc BBG-1022-2FS Product Manual page 77

Setup/Operating Instructions
Table 3-2 BBG-1022-2FS Function Submenu List — continued
• Text Box Sizing Controls
• Text Box Border Enable
Note: This status display mirrors the same display in the Timecode tab. Device must be set to output a timecode in order for
timecode burn-in to function. See Timecode (p. 3-37) for information on using timecode controls.
• Timecode Insertion Control
• Timecode Format Display Selector
BBG1022-2FS-OM (V1.3)
BBG-1022-2FS Function Menu List and Descriptions
(continued)
Provides controls for setting the size of the burn-in text background box.
• Auto allows text box to proportionally size with selected text size.
• Custom allows override of proportional sizing and allows text V and H
dimensions to be set as desired.
• Text Box Width and Height allow manual sizing when set to Custom.
• Custom allows override of proportional sizing and allows text V and H
dimensions to be set as desired.
• Horizontal and Vertical Padding allow fine adjustment of V and H
dimensions to be set when Auto is selected.
When set to Enabled, applies a white hairline border to the text box
edges.
Provides controls for burn-in of timecode on output
video.
Selects the rules for timecode burn-in overlay insertion into output video.
Note: If timecode insertion is desired for input LOS conditions, the
Framesync On Loss of Video control must be set to provide a
raster (from one of the choices shown) to support the timecode
insertion.
If this control is set to "Disable Outputs", no raster or timecode
insertion will be present on the output video under input LOS
conditions. See Framesync (p. 3-15) for more information.
Selects the format of timecode string burn-in overlay insertion into output
video from choices shown.
BBG-1022-2FS PRODUCT MANUAL
3-47