Input Audio Status - Cobalt Digital Inc BBG-1022-2FS Product Manual

3
Table 3-2 BBG-1022-2FS Function Submenu List — continued

Input Audio Status

Note:
Input Audio Status tab has identical independent controls/status displays for both Path 1 and Path 2 using the
Path 1 / Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Access controls and status for other path
using the respective sub-tab.
Individual signal status and peak level displays for embedded audio input pairs, and AES/analog input pairs as described below.
• Absent: Indicates embedded channel or AES pair does not contain recognized audio PCM data.
• Present - PCM: Indicates AES pair or embedded channel contains recognized audio PCM data.
• Dolby E: Indicates embedded channel or AES pair contains Dolby
• Dolby Digital: Indicates embedded channel or AES pair contains Dolby
Note: • Dolby status displays occur only for valid Dolby
• AES Dolby-encoded inputs that are routed directly to device are directed via a special path that automatically by-
passes SRC. However, AES inputs to other destinations (e.g., AES embedding) are first applied through SRC. These
paths disable SRC if Dolby-encoded data is detected. To avoid a possible "Dolby noise burst" if an input on these
paths changes from PCM to Dolby, it is recommended to set the AES SRC control for the pair to SCR Off for an AES
input that is expected to carry a Dolby signal.
3-18
BBG-1022-2FS Function Menu List and Descriptions
Displays signal status and payload for embedded and
discrete audio received.
®
E encoded data.
®
signals meeting SMPTE 337M standard.
BBG-1022-2FS PRODUCT MANUAL
®
Digital encoded data.
BBG1022-2FS-OM (V1.3)