Video Proc/Color Correction - Cobalt Digital Inc BBG-1022-2FS Product Manual

Setup/Operating Instructions
Table 3-2 BBG-1022-2FS Function Submenu List — continued
Note:
Video Proc tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs.
Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab.
• Video Proc
• Reset to Unity
• Luma Gain
• Luma Lift
• Color Gain
• Color Phase
• Gang Luma/Color Gain
BBG1022-2FS-OM (V1.3)
BBG-1022-2FS Function Menu List and Descriptions
Provides the following Video Proc and Color Correction
parametric controls.
Video Proc (Enable/Disable) provides master on/off control of all Video
Proc functions.
• When set to Disable, Video Proc is bypassed.
• When set to Enable, currently displayed parameter settings take effect.
Reset to Unity provides unity reset control of all Video Proc functions.
When Confirm is clicked, a Confirm? pop-up appears, requesting
confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
Adjusts gain percentage applied to Luma (Y channel).
(0% to 200% range in 0.1% steps; unity = 100%)

Video Proc/Color Correction

Adjusts lift applied to Luma (Y-channel).
(-100% to 100% range in 0.1% steps; null = 0.0%)
Adjusts gain percentage (saturation)
applied to Chroma (C-channel).
(0% to 200% range in 0.1% steps; unity = 100%)
Adjusts phase angle applied to Chroma.
(-360° to 360° range in 0.1° steps; null = 0°)
When set to On, changing either the Luma Gain or Color Gain controls
increases or decreases both the Luma and Color gain levels by equal
amounts.
BBG-1022-2FS PRODUCT MANUAL
3-27