Presets - Cobalt Digital Inc BBG-1022-2FS Product Manual

Setup/Operating Instructions
Table 3-2 BBG-1022-2FS Function Submenu List — continued

Presets

• Preset Layer Select
Allows selecting a functional layer (or "area of concern") that the preset is concerned with. Limiting presets to a layer or area of
concern allows for highly specific presets, and masks changing card settings in areas outside of the layer or area of concern.
Default All setting will "look" at all card settings and save all settings to the defined preset with no masking.
video proc setting in effect, and at a later time EAS audio routing is desired to be saved and invoked as a preset, selecting
In Audio Routing here tells the preset save and load to not concern itself with video proc settings. In this manner, any video proc
settings in effect when the EAS preset is invoked will not affect any video proc settings that might be currently in effect.
• Preset Enter/Save/Delete
Protected state –
changes locked out
BBG1022-2FS-OM (V1.3)
Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Protect (ready): This state awaits Protected and allows preset Save/
Delete button to save or delete current card settings to the selected
preset. Use this setting when writing or editing a preset.
• Protected: Toggle to this setting to lock down all presets from being
inadvertently modified or deleted. Use this setting when all presets
are as intended.
• New/Updated Preset Name: Field for entering user-defined name for
the preset being saved (in this example, "IRD Rcv122").
• Save: Saves the current card settings under the preset name defined
above.
Ready (open) state –
changes can be applied
BBG-1022-2FS PRODUCT MANUAL
BBG-1022-2FS Function Menu List and Descriptions
Allows user control settings to be saved in a Preset and
then loaded (recalled) as desired, and provides a
one-button restore of factory default settings.
Selecting a layer (in the example, "In Audio
Routing") will set the preset to only "look at" and
"touch" audio routing settings and save these
settings under the preset. When the preset is loaded
(recalled), the card will only "touch" the audio routing
layer.
Example: Since EAS audio routing can be
considered independent of video proc settings, if
normal audio routing was set up with a particular
3-61