Front Panel User Menus - Cobalt Digital Inc BBG-1022-2FS Product Manual

3

Front Panel User Menus

3-76
Some of the mode and parametric controls available using the web UI (as
described in BBG-1022-2FS Function Menu List and Descriptions) are
available using the front panel display and arrow navigating buttons.
The front panel menus offers a true standalone means to configure the device
with no connection to a network required, and is useful where changes need to
be done immediately (or in emergency situations) without the benefit of
network access. However, the web GUI provides greatly simplified user
interfaces as compared to using this menu and the arrow controls. For this
reason, it is strongly recommended that the web GUI or DashBoard remote
control be used for all applications other than the most basic cases.
Note: • When a setting is changed using either the menu described here or the web
GUI remote control, settings displayed are the settings as effected by the
device itself and reported back to the remote control; the value displayed at
any time is the actual value as set on the device.
• Items other than status displays have an additional submenu where a
selection for the item can be made. Some submenu items listed in Table 3-3
have additional nested submenus (denoted by *). These multiple-level
submenus are not listed here; refer to the referenced page number for more
information.
BBG-1022-2FS PRODUCT MANUAL
Uploading Firmware Using Web Interface and GUI
BBG1022-2FS-OM (V1.3)