Cobalt Digital Inc BBG-1022-2FS Product Manual page 64

3
Table 3-2 BBG-1022-2FS Function Submenu List — continued
Note: •
AES Out Ch 2 has controls identical to the Source, Gain, Mute, and Invert controls described here for AES Out
Ch 1. Therefore, only the AES Out Ch 1 controls are shown here.
•
For each channel, its source and destination should be considered and appropriately set. Unused destination
channels should be set to the Silence selection.
• AES Output Channel Source
• Channel Mute/Phase Invert/Gain Controls
and Peak Level Display
3-34
BBG-1022-2FS Function Menu List and Descriptions
(continued)
Using the Source drop-down list, selects the audio input source to be
routed to the corresponding AES output channel from the following
choices:
• Audio Bus Ch 1 thru Ch 16 (Path1 or 2)
• Built-in Tone generators Tone n
(-20 dBFS level tone generators with n being frequencies of 100, 200,
300, 400, 500, 600, 700, 800, 900, 1k, 2k, 4k, 6k, 8k, 12k, and 16k)
• Flex Bus A thru P mixer sum node outputs
• Audio LTC (Path1 or 2)
• Downmixer L (Path1 or 2)
• Downmixer R (Path1 or 2)
Provides Mute and phase Invert channel controls, as well as peak level
meter for each output channel. (Meter shows level as affected by Level
control.)
Gain controls allow relative gain (in dB) control for the corresponding
destination AES output channel.
(-80 to +20 dB range in 1.0 dB steps; unity = 0 dB)
Note: Although the BBG-1022-2FS can pass non-PCM data such as
®
Dolby E or AC-3, setting the gain control to any setting other than
default 0 will corrupt Dolby data.
BBG-1022-2FS PRODUCT MANUAL BBG1022-2FS-OM (V1.3)