Delta ASD-A2 Series User Manual page 308

ASDA-A2
Format： Hexadecimal
Settings：
P1-20 CPMK CAPTURE – Masking Range Setting
Operational
Interface：
Default： 0
Control
Mode：
Range： 0 ~ +100000000
Size：
Revision February, 2017
X: Bit settings of Capture additional function settings:
Bit
Function
Explanation
Y: Reserved
Z: Bit settings of Compare additional function settings:
Bit
Function
Explanation
U: Reserved
Panel/Software
ALL
Unit： The Pulse Unit of Capture Axis
Data
32-bit
3 2 1
- - - Repeating Mode
Enable the repeating mode. After the last
position is captured, the system will
automatically repeat this CAPTURE
function. The captured data is still stored in
- - -
the data array that the starting address is
specified by P5-36!
(This function is available in firmware
version V1.038 sub19 and later models only)
3 2 1
- - - Automatically set P1-24 to 0.
When Bit0 is set to 1, P1-24 will only be
effective once and reset to 0 automatically!
Otherwise, the value of P1-24 will remain
- - -
unchanged.
(This function is available in firmware
version V1.038 sub19 and later models only)
Communication
Chapter 8 Parameters
0
0
Address: 0128H
0129H
Related Section: N/A
8-57