Table of Contents
Advertisement
2.7 The storage system
JHJDS30 series hand held digital storage oscilloscope reference waveform can be stored in the
two groups (Ref - A, the Ref - B), 6 set of screen shots to oscilloscope in internal storage.
● First find a screen shot interface press "MENU"→"F4" Screen shot is set to "off"
● Reference waveform storage: press the "MATH" find reference
waveform Settings→ "F1" Settings stored reference
waveform Ref - A, then press "OK" button, which shows
"SAVING" reference waveform is saved
● See the reference waveform: according
to the "MATH"→"F1"→"F3" open the
Ref - A reference waveform, as shown in figure 2-17
Figure 2-17 check the reference waveform
40
Advertisement
Table of Contents
