Multimeter Instructions - Jinhan JDS3022E Manual

4.2 Multimeter instructions

Table 4-2 multimeter operation keys function description
The keys
F1 Select "dc voltage" file shortcut, ac voltage, dc voltage switch button
F2 Select the "dc" A file shortcut keys, "dc", "communicate A" switch button
F3 Dc mA "selected" file shortcut keys, "dc mA", "communication mA" switch button
F4 Select the "on-off" file shortcut keys, "on-off", "capacity" to switch button
F5 Selected file shortcut "resistance", "resistance" and "diode" switch button
RUN Multimeter run/maintained (HOLD) button
Press set to manual, range can be set up by this button
AUTO Press set to automatic
⒈ Dc and Ac voltage measurement
① Take black pens and the instrument ".com "terminal, red pens and pick up the instrument
Ω" V "terminals.
② Long, oscillographic table "PRW" button to boot and then press "F5" button (or if the
oscilloscope in other interface time holding down the "MENU" button to press "F5") to switch to
the multimeter function interface.
instructions
53