Table of Contents
Advertisement
④ Press "F3" button, and then by pressing the "
amplitude size, adjust good after press" OK "button, the set to 3 v
⑤ Press "F4" button, and then by pressing the "
offset, adjust good after press" OK "button, in this setting is + 0.00.
After all set, finally shows the waveform is shown in figure 6-6, shown in figure 6-7:
Figure 6-6 generate sine wave
Figure 6-7 sine wave
70
"button to adjust the signal
" button to adjust the signal
Advertisement
Table of Contents
