Table of Contents
Advertisement
Owe to compensate
(4)
If necessary, adjust the probe, repeated operation when necessary.
1.6 Preliminary using oscilloscope display signal automatically
JHJDS30 series hand held digital storage oscilloscope
has the function of signal automatically set. According
to the input signal, can automatically adjust parameters
such as voltage, time base and trigger mode, so as
to achieve the best state of signals. Automatically
set to work, the requirements of the measured signal
frequency is greater than or equal to 50 Hz.
This part mainly discusses the preliminary use
the oscilloscope's customer to do a demonstration of
automatic display signal but not introduce all the functions
Compensation OK
Figure 1-5
24
Spillover compensation
Figure 1-6 boot screen
Advertisement
Table of Contents
