Table of Contents
Advertisement
●
Enter the interface, the screen in the middle horizontal line in the state of moving from
left to right, connect the probe to the oscilloscope, to record the signal, and then contact to
enter record state, press "F3" in "F1" button to stop recording.
●
After recording the waveform record can press "F5" playback waveform. As shown in figure5-2
Note: the recorder to record waveform frequency range of 20 Hz waveform, records need to
access the oscilloscope interface manually adjust the time base for 100 ms above waveform
display.
58
Advertisement
Table of Contents
