Jinhan JDS3022E Manual page 41

● Intercepting waveforms images: press "MENU" can be set to find the screenshot of the page -
"F4" the screenshot is set to "on", then press "OK" to save screenshots, need to save a
screenshot, press "F5" set the screenshots serial number. Used in this manual waveform images
are from an oscilloscope screenshots, etc.
● Low check capture images:
Turn off the oscilloscope first, and then connect the oscilloscope and computer with USB data
cable is good, and at the same time, press the "OK" button and "PRW" button on the screen to
the bright can let go; At this point, the computers will be prompted to have U disk inserted,
open the U disk can see pictures of interception. After the operation, please click on the
computer to exit the U disk mode, then disconnect the cable, long press oscillograph "PRW"
button to turn it off.
41