Table of Contents
Advertisement
Table 2-2 in detail the function of each menu item
channel
CH1
CH2
According
open
close
1X
The probe
10X
100X
coupling
ac
dc
Reverse phase
open
close
1.Set the channel coupling
In applying to the CH1 channel signal, for example, measured signal is a square wave signal
containing ac component.
● CH1, for example, enter a contains the dc component of the signal.
channel 1
channel 2
Open the display waveform
Disable display waveform
According to the probe, select one of the attenuation
coefficient
to
keep
correctly.
There are three ：1X、10X、100X
Stop the dc component input signal
By the input signal of ac and dc component
Open the inverse function
Close the inverse function
vertical
deflection
31
coefficient
Advertisement
Table of Contents
