Jinhan JDS3022E Manual page 34

for example:To set the waveform does not display the CH1
channel
● Press "CH1"→"F2", set the CH1 channel does not display
The waveform. As shown in figure 2-8
5.V/vertical adjustment Settings
In regulating the vertical v/cell, v/range is 100 mv/div - 50 v/div (probe 10 x), stepping in
1-2-5 ways, or 10 mv/div - 5 v/div 1 x (probe), 1 v/div - 500 - v/div (100 x) probe. Take the
case of CH1 channel:
● Such as setting the vertical direction of 2.00 V/div, To probe is set to 1 x gear as an
example
●Press " " to adjust the vertical v/case, at the same time can press"
the entire waveform. As shown in figure 2-9
34
Figure 2-8
"to move up, down