Table of Contents
Advertisement
mark; Click "TRIG" and press "
" button on the right side panel again adjusting trigger flag
arrow, according to the trigger marks relative channel 1 position and the current vertical per
division on behalf of the voltage value to set the trigger level size.
Set up the slope,
3, press "F3" button to choose the slope for the "up" or "down".
Set the trigger mode:
4, press "F4" choose "automatic", "normal" or "single". As shown in figure 2-15, 2-16
Figure 2-15 normal trigger
Figure 2-16 single trigger
39
Advertisement
Table of Contents
