Table of Contents
Advertisement
that show the information of gear and measuring data is correct.
According to the following operation adjustment channels menu probes attenuation coefficient of
scale:
Press CH1 and CH2 key, press the F3 choose appropriate Settings, the Settings will be saved to you to change the
Settings again. As shown in figure 2-6
● Press "CH1"→"F3" set the probe for 10 x
3.Waveform reverse set
● Press the "CH1"→"F5" will reverse phase can be set to "on" see waveform inverse, as shown
in figure 2-7
Figure 2-6 set probe 10 x
Figure 2-7 waveform inverse
4.Waveform display Settings
By setting allows any channel of waveform display or not.
33
Advertisement
Table of Contents
