Holding A Storage Oscilloscope Connected Input - Jinhan JDS3022E Manual

1.3 Holding a storage oscilloscope connected input

Instructions ：
1.The oscilloscope probe
2.Oscilloscope input
3.Oscilloscope digital channel input
4.The signal generator output
5.stents
6.Is clipped
7.Multimeter to test the pen
8.Multimeter input pin,
four round pins are respectively 10 a current,
current mA stall, grounding, voltage
Note: figure 1-3 for single channel
oscilloscope connected input, dual-channel
oscilloscope connected input is from left
figure 1-3
20