5.3.1 Fiber Loop Modules
Two types of fiber optic modules are available to use to transmit and receive communication with the SK-NIC. See Figure 5.4. For more
information see SK-FML / SK-FSL installation sheet P/N LS10178-001SK-E.
SK-FSL Single-Mode Fiber
The SK-FML (Fiber-Optic Multi-Mode) and SK-FSL (Fiber-Optic Single-Mode) are plug-in fiber loop modules. The two types of fiber
optic modules are used as one channel to transmit or receive communications with the SK-NIC, ARCNET communication circuit.
The following describe the two types of fiber optic modules.
•
The SK-FML is a fiber module that allows the multi-mode fiber to be linked between nodes.
•
The SK-FSL is a fiber module that allows the single-mode fiber to be linked between nodes.
Each fiber loop module can Transmit (TX) and Receive (RX) fiber-optic cable connecting to the SK-NIC. Up to two fiber loop cards can
be added to the SK-NIC, and both cards may be combined in the same configuration. See Figure 5.5.
SK-NIC-KIT Mounting Kit
SK-NIC can be mounted within the 6820/EVS cabinet or in the SK-NIC-KIT accessory cabinet. The SK-NIC-KIT includes the SK-NIC,
cabinet with door, cable, & mounting hardware. The accessory kits are available if you want to install the SK-NIC outside of the
6820/EVS cabinet.
5.3.2 SK-NIC Installation
The SK-NIC is designed to mount on one of the SLC expander standoff sets inside the cabinet or remotely using the SK-NIC-KIT.
Use the following steps to properly mount the SK-NIC inside the 6820 or 6820EVS.
1.
Place the SK-NIC on one of the SLC expander standoff sets.
70
SK-FML Multi-Mode Fiber
Figure 5.4 Types Fiber Loop Modules
Figure 5.5 SK-NIC with Fiber Loop Modules
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017