B.8: Characters Used For Editing Text; B.9: Example Name Edit - Honeywell Silent Knight SK318PT Installation And Operation Manual

Appendix B: Editing Text Using the Built-In Programmer
This section contains tables of programmable characters that may be used for device, module, site, template, group, and zone names or
phone numbers. T9 style editing is used.
B.8 Characters Used for Editing Text
"Character Table" on page 194 lists the available characters and their associated numeric designator. When programming:
1. Use the Up or Down arrow key to scroll to the mode wanted.
2. Press the number shown in "Character Table" on page 194 until the character wanted is shown.
3. Arrow left and right for position, and press enter to accept.
B.9 Example Name Edit
1. Press up or down to select upper case letters mode, Press 2 until "F" appears.
2. Press up or down to change mode to lower case letters, Press 3 until "i" appears.
3. Press 6 until "r" appears.
4. Press 2 until "e" appears.
5. Press 0 to space, then continue to next word using the same process.
6. Press ENTER to accept.
NOTE: After three seconds of no change, letter will automatically be accepted. Also pressing next number will automatically accept
previous choice.
194
Lower Case Letters
abc1 def2
mno5 pqr6
yz9 Spc0
Upper Case Letters
ABC1 DEF2
MNO5 PQR6
YZ9 Spc0
Numbers and Special Characters
1 [ ]1 2 ( )2
5 ' "5 6 ? !6
9 = -9 0 0
Table B-1 Character Table
Figure B.1 Edit Name Example
ghi3 jkl4
stu7 vwx8
GHI3 JKL4
STU7 VWX8
3 . ,3 4 : ;4
7 ' /7 8 – +8
* & @ * # $
P/N LS10144-001SK-E:SKRev mm/dd/yyyy
6820 / 6820-EVS
#