Icom IC-M506GE Instruction Manual page 68

7
DSC OPERATION
D Channel 16 Switch function
By regulation, after receiving a Distress call, the transceiv-
er switches the operating channel to Channel 16. However,
when this setting is set to "OFF," the function enables the
transceiver to remain on the operating channel, even after
receiving a Distress call.
q Select "CH 16 SWITCH" in the DSC Settings menu.
➪ DSC SET
MENU
(Push [MENU]) (Select icon)
w Rotate dial or push [Y]/[Z] to set the Channel 16 Switch
function to "Auto (No Delay)," "10 Second Delay" or "OFF,"
then push [ENT].
• Push [BACK] to return to the previous screen.
62
➪ CH 16 Switch
(Rotate dial, then push [ENT].)
(default)
Auto (No Delay): After receiving a Distress call, and
[ACPT] is pushed on the confirmation
screen, the transceiver immediately
switches to Channel 16.
10 Second Delay: After receiving a Distress call, and
[ACPT] is pushed on the confirmation
screen, the transceiver remains on the
current operating channel for 10 sec-
onds. After that, the transceiver auto-
matically switches to Channel 16.
(default)
OFF : Even after receiving a Distress call, the
transceiver remains on the operating
channel.
• The "
e Push [EXIT] to return to the normal operating mode.
" icon appears.