Icom IC-M506GE Instruction Manual page 16

4
BASIC OPERATION
D Channel group selection
There are preset international channels for the transceiver.
Except for the Europe versions, you can select a channel
group suitable for your operating area, as described below.
q Push [MENU].
w Rotate dial or push
icon and then push the softkey below the icon.
• RADIO SETTINGS menu is displayed.
e Rotate dial or push [∫]/[√] to select "CHAN Group," and
then push [ENT].
r Rotate dial or push [∫]/[√] to select the desired channel
group, and then push [ENT].
10
[Ω]/[≈]
to select the "RADIO SET"
t Push [EXIT] to exit the Menu screen.
y Rotate dial or push [∫](CH)/[√](CH) to select a channel.
• Pushing [Y]/[Z] on the microphone selects only Favorite chan-
nels.
• You can turn OFF the FAV on MIC setting (p. 93). After that, you
can select all channels by using the microphone.
• The "DUP" icon appears when a duplex channel is selected.
• "A" appears when a simplex channel is selected.
Channel group icon appears
When the USA channel
group is selected.