Icom IC-M506GE Instruction Manual page 54

7
DSC OPERATION
D Receiving a Distress Relay Call
When a Distress Relay call is received:
➥ The emergency alarm sounds for 2 minutes.
➥ " RCVD DISTRESS RELAY" appears and the backlight
blinks.
q Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
w Push a softkey to select your desired action.
48 48
[IGN]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• By pushing [PTT], the transceiver also exits the DSC mode.
• The " " icon continues to blink and the Call is stored in the
Received Call Log.
[INFO]
➥ Push to display the Received call information. (p. 58)
[ACPT]
➥ Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
• Even if you haven't pushed [CH 16] within 10 seconds, the
operating channel automatically switches to Channel 16. (p.
69)
Push