Icom IC-M506GE Instruction Manual page 62

7
DSC OPERATION
D Receiving a Polling Request call
When a Polling Request call is received:
➥ The alarm sounds for 2 minutes.
➥ "RCVD POLLING REQUEST" appears. The backlight
blinks for 2 minutes.
q Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
w Push a softkey to select your desired action.
56 56
[IGN]
➥ Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• The " " icon continues to blink and the Call is stored in the
Received Call Log.
[INFO]
➥ Push to display the Received call information. (p. 58)
[ACK]
➥ Push to display the "POLLING REPLY" screen to reply
to the Call. (p. 44)
When "POSITION ACK" is set to "Auto," the transceiver au-
tomatically replies to the Call. In that case, both the TX and
RX calls are stored in the Transmitted and Received Call
Logs.