Icom IC-M506GE Instruction Manual page 31

When no GPS receiver is connected, and both position
and time have been manually entered, the screen as
shown below appears. Edit your latitude and longitude po-
sition and UTC time as follows:
➥ Push [CHG], then edit your latitude and longitude posi-
tion and UTC time.
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or
"→," then push [ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the cur-
sor is on the 'N' or 'S' position.
• Select W (West longitude) or E (East longitude) when the
cursor is on the 'W' or 'E' position.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25