Installing The Aileron Servos; Installing The Propeller - Seagull Models SEA230B Assembly Manual

Skyraider
WARBIRD 10cc-15cc
Tie wraps.

INSTALLING THE PROPELLER.

The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
16
3x15mm

INSTALLING THE AILERON SERVOS.

Servos
.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
2) Use dental floss to secure the connec-
tion so they cannot become unplugged.
Instruction Manual.
Small weight
.
Thread
16