Seagull Models SEA230B Assembly Manual page 29

2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
Receiver.
Battery.
INSTALLING ANTENNA - WING GUN.
1) Route the antenna in the antenna tube
inside the fuselage and secure it to the
bottom of fuselage using a plastic tape.
2) The last detail is to install the antenna
onto the fuselage. Use a hobby knife to
cut a slot in the top of the fuselage for the
antenna.
Remove covering to see hole.
WWW.SEAGULLMODELS.COM
Battery.
3) Tighten the antenna to the fuselage.
The antenna is removeable so you can in-
stall it at the flying field to prevent dam-
age in transporting.
Tighten the antenna.
Epoxy.
4) Insert the wing gun onto the wing.
Epoxy.
29