Table of Contents
Advertisement
Blind nut.
5) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x15mm hex head bolts to se-
cure the motor. Please see picture shown.
WWW.SEAGULLMODELS.COM
4 mm
4 mm
.
M3x12mm
Epoxy
145 mm
Balsa stick.
Epoxy
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Speed control
Battery.
15
Advertisement
Table of Contents
