Seagull Models SEA230B Assembly Manual page 6

Bee version
Table of Contents

Advertisement

Skyraider
WARBIRD 10cc-15cc
INSTALL FLAP CONTROL HORN.
Install the flap control horn using the
same method as same as the aileron con-
trol horns.
Fiberglass control horn.
Epoxy.
INSTALL ELEVATOR CONTROL HORN.
Fiberglass control horn.
6
.
Epoxy.
Elevator fiberglass control horn.
INSTALL RUDDER CONTROL HORN.
Repeat steps to install the rudder control
horn as same as steps done for ailerons.
Fiberglass control horn.
Epoxy.
Rudder fiberglass control horn.
INSTALLING THE FUSELAGE SERVOS.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
Instruction Manual.
Epoxy.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Skyraider warbird 10cc

Table of Contents