Locking The Cutter For Transport - Schulte FX-315 Operator's Manual

TIRE
ASSEMBLY
210-003 Solid Laminated Tire, 20
210-175 Forklift Tire
210-175F Forklift Tire, Foam Filled
210-192 Solid Laminated Tire, 26
210-540 Severe Duty
210540F Severe Duty, Foam Filled

13.2 Locking the Cutter For Transport

Transport lock pins are provided for the center
phasing and wing lift hydraulic cylinders. These
pins are inserted in their respective holes, they
prevent the wings or center frame from dropping
due to a hydraulic cylinder or hose failure.
FULLY extend the phasing cylinders so that the
transport lockup bar can fit around the center
phasing cylinder rod.
FULLY retract the wing lift cylinders until the lock up
hole on the wing deck lines up with the lock up
plates. Slide the wing lock up pin from the storage
position to the locked position. Fasten it with the
lynch pin.
IMPORTANT: Never transport the rotary cutter
without the transport lock pins.
FX-315/FX-310 03/21
© 2021 Alamo Group Inc.
OPERATION
Tire Speed / Inflation Pressure:
DESCRIPTION
Operation Section 4-51
TRANSPORT
SPEED
20 kph or 12 mph n/a
40 kph or 25 mph 90 PSI / 6.2bar / 620 KpA
40 kph or 25 mph n/a
20 kph or 12 mph n/a
40 kph or 25 mph 40 PSI / 2.8 bar / 280 KpA
40 kph or 25 mph n/a
INFLATION
PRESSURE