Hydraulic Circuits; Wing System - Schulte FX-315 Operator's Manual

HYDRAULIC CIRCUITS

Adjust the hoses in the hose organizer to allow sufficient slack for turning. Ensure the hoses will not contact the
driveline, will not bind while turning or can become pinched.
Route the left wing hoses over the center lock bar and fasten to the hose clamp. Wrap the hose sections into
hook-and-loop hose wrap.

WING SYSTEM

If the rotary cutter has been supplied to you already assembled it is possible that the wing lift
hydraulic cylinders are not completely filled with oil. An indication of this is that the wing lock
up pins cannot be removed freely.
First fully retract the wing cylinders then remove the wing lock up pins.
The wing lift system is marked in blue at the tractor connection.
Refer to the Parts Manual for a complete list of fittings and hydraulic hose part numbers.
NEVER FORCE THE WING LIFT LOCK PINS OUT OF THEIR LOCK POSITION AS THE
WINGS MAY SUDDENLY DROP CAUSING INJURY OR EVEN DEATH
Use C301-815 as the standard wing system.
FX-315/FX-310 03/21
© 2021 Alamo Group Inc.
ASSEMBLY
C301-815 Double Acting - Tree Connection
Assembly Section 3-3