OPERATION
To set the deck pitch, first block the front of the
cutter under the skids. Lower the cutter until the
tension is removed from the tension links and the
adjustment lugs can be moved easily. Before
making any adjustments, ensure the tractor is in
park, the engine is shut off and the ignition key is
removed.
To increase the height of the front, add adjustment
lugs from the storage position. If all the lugs have
been used, the lock nut can be adjusted as well.
To decrease the height of the front, remove
adjustment lugs and place them in the storage
position.
For fine adjustment, the nut can be turned
accordingly.
FX-315/FX-310 03/21
Operation Section 4-15
© 2021 Alamo Group Inc.