Schulte FX-315 Operator's Manual page 62

ASSEMBLY
The transport lockup and center wheel standard are
attached using the pins provided. The tension links
must also be attached to the center wheel standard
beam using the pins provided.
The wheel standards on the wings must be taken
off and inverted. Wheels and tires for the wing axles
are stored on top of the cutter deck.
The tractor shaft is stored on the cutter and held
secure by two braces. The braces must be removed
from the cutter.
FX-315/FX-310 03/21 Assembly Section 3-16
© 2021 Alamo Group Inc.