Step 2: The lever on HDD tray pops up automatically, pull it outwards and remove the HDD tray.
Step 3: Tilt and install the HDD into the tray.
6.5 Redundant Hot-plug Power Supply Option
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
1.
Access the product rear panel.
2.
Remove the power supply blank.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching it.
3.
Install the power supply into the power supply bay.
Hardware Options Installation
25