Address Mapping Sets; Figure 7-5 Menu 15 - Nat Setup; Figure 7-6 Menu 15.1 - Address Mapping Sets - ZyXEL Communications Prestige 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router
only configure Set 1. Set 255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the
SMT will use Set 1, which supports all mapping types as outlined in Table 7-2. When you select SUA
Only, the SMT will use the pre-configured Set 255 (read only).
The Server Set is a list of LAN side servers mapped to external ports. To use this set (one set for the
Prestige 10), a server rule must be set up inside the NAT Address Mapping set. Please see section 7.4 for
further information on these menus. To configure NAT, enter 15 from the main menu to bring up the
following screen.

7.3.1 Address Mapping Sets

Enter 1 to bring up Menu 15.1 – Address Mapping Sets.
SUA Address Mapping Set
Enter 255 to display the next screen (see also section 7.2.1). The fields in this menu cannot be changed.
7-8
Menu 15 – NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Enter Menu Selection Number:
Figure 7-5 Menu 15 – NAT Setup
Menu 15.1 - Address Mapping Sets
1.
2.
3.
4.
5.
6.
7.
8.
255. SUA (read only)
Enter Menu Selection Number:
Figure 7-6 Menu 15.1 – Address Mapping Sets
NAT