Ip Policy Routing Example; Figure 13-4 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup; Figure 13-5 Menu 11.3 - Remote Node Network Layer Options - ZyXEL Communications Prestige 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Edit IP Alias= No
Figure 13-4 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as appropriate. You
can cascade up to four policy sets by typing their numbers separated by commas.
IP Options:
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Press ENTER to Confirm or ESC to Cancel:
Figure 13-5 Menu 11.3 – Remote Node Network Layer Options

13.6 IP Policy Routing Example

If a network has both Internet and remote node connections, you can route Web packets to the Internet
using one policy and route FTP packets to a remote network using another policy. See the next figure.
13-6
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
Menu 11.3 - Remote Node Network Layer Options
Bridge Options:
Ethernet Addr Timeout (min)= 0
Type IP Policy
sets here.
Type IP Policy
sets here.
IP Policy Routing