Pressing [ENTER] displays Menu 3.2.1 – IP Alias Setup, as shown next.
Follow the instructions in the following table to configure IP Alias parameters.
FIELD
IP Alias
Choose Yes to configure the LAN network for the Prestige.
IP Address
Enter the IP address of your Prestige in dotted decimal notation
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
RIP Direction
Press [
Both, In Only or Out Only.
Version
Press [
RIP-2B or RIP-2M.
Incoming
Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters
between this node and the Prestige.
Outgoing
Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters
this node and the Prestige.
When you have completed this menu, press [
save your configuration, or press [
Internet Access
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Figure 3-5 Menu 3.2.1 – IP Alias Setup
Table 3-1 IP Alias Setup Menu Fields
DESCRIPTION
SPACE BAR
] to select the RIP direction. Choices are None,
SPACE BAR]
to select the RIP version. Choices are RIP-1,
ENTER
ESC
] at any time to cancel.
Prestige 650R-31/33 ADSL Router
] at the prompt "Press ENTER to Confirm..." to
EXAMPLE
Yes
192.168.2.1
255.255.255.0
None
RIP-1
3-7