Table of Contents
Advertisement
FIELD
Use Time Server
when Bootup
Time Server
Address
Current Time
New Time
Current Date
New Date
Time Zone
Daylight Saving
Start Date
End Date
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
12.3.1 Resetting the Time
The Prestige resets the time in three instances:
i.
On leaving menu 24.10 after making changes.
ii.
When the Prestige starts up, if there is a time server configured in menu 24.10.
iii.
24-hour intervals after starting.
System Maintenance and Information
Table 12-2 Time and Date Setting Fields
Enter the time service protocol that your time server sends when you turn on the
Prestige. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.
Enter the IP address or domain name of your time server. Check with your
ISP/network administrator if you are unsure of this information.
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you re-enter this menu.
Enter the new date in year, month and day format.
Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
If you use daylight savings time, then choose Yes.
If using daylight savings time, enter the month and day that it starts on.
If using daylight savings time, enter the month and day that it ends on
Prestige 650R-31/33 ADSL Router
DESCRIPTION
12-5
Advertisement
Table of Contents
Troubleshooting
