Chapter 14 Call Scheduling; Introduction; Figure 14-1 Menu 26 - Schedule Setup - ZyXEL Communications Prestige 650R-31/33 User Manual

Call scheduling (applicable for PPPoE and PPPoA encapsulation only) allows you to dictate when

14.1 Introduction

The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in Menu 11.1 –
Remote Node Profile. From the main menu, enter 26 to access Menu 26 – Schedule Setup as shown next.
Schedule
Set #
------
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Call Scheduling
Menu 26 - Schedule Setup
Name
-----------------
1 ______________
2 ______________
3 ______________
4 ______________
5 ______________
6 ______________
Enter Schedule Set Number to Configure=
Edit Name=
Figure 14-1 Menu 26 – Schedule Setup
Prestige 650R-31/33 ADSL Router
Call Scheduling
a remote node should be called and for how long.
Schedule
Set #
------ ------------------
7 ______________
8 ______________
9 ______________
10 ______________
11 ______________
12 ______________
Chapter 14
Name
14-1