Remote Management Setup; Figure 15-2 Menu 24.11 - Remote Management Control; Table 15-1 Menu 24.11 - Remote Management Control - ZyXEL Communications Prestige 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router

15.4.1 Remote Management Setup

Remote management setup is for managing Telnet, FTP and Web services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your Prestige from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 – Remote Management Control (shown next).
TELNET Server:
FTP Server:
Web Server:
FIELD
Telnet Server
FTP Server
Web Server
Port
Access
15-2
WAN only (Internet)
LAN only
Menu 24.11 - Remote Management Control
Port = 23
Secured Client IP = 0.0.0.0
Port = 21
Secured Client IP = 0.0.0.0
Port = 80
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Figure 15-2 Menu 24.11 – Remote Management Control
Table 15-1 Menu 24.11 – Remote Management Control
Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management.
Select the access interface (if any) by pressing the [SPACE BAR].
Choices are: LAN only, WAN only, All or Disable.
ALL (LAN and WAN)
Disable (Neither)
Access = LAN only
Access = LAN only
Access = LAN only
DESCRIPTION EXAMPLE
23
LAN only
(Default)
Remote Management