Serial (Rs-232 Console Port) - BEC MX-230 M1 User Manual

Serial (RS-232 Console Port)

Here is the Serial RS-232 console configuration to connect with any existing industrial machine.
General Settings
Baud Rate: Specify the desire baud rate (speed) run on this serial port
Data Bits: Specify the number of data bits contained in a frame
Parity: A simple form of error detection in a frame
Stop Bits: Specify the stop bits of a frame
Application
Mode: Select one of the mode from the list, Disable / Modbus/TCP / UDP Server / UDP Client / TCP
Server / TCP Client / Telnet Server / SSH Server.
 Disable: Disable the serial port, RS-232.
 Modbus/TCP: Modbus is a master/slave communication uses IP over Ethernet to carry data
between devices/machines
◼ Port: Generally uses port 502, master and slave must use the same port. Specify port
other than port 502 if desired.
◼ Response Timeout (ms): Specify a response time-out in milliseconds. After the
response timeout expires, default is in 3000ms (3 seconds), data transactions will get
aborted.
Here are the possible causes for a timeout to occur:
•
Serial connection errors between the MX-230 M1 and the serial device
•
Hardware issue with the Serial device
•
Serial device response time is longer than the specified Response Timeout value.
Increase the time-out value to see if it helps
BEC MX-230 M1 User Manual
Device Configuration
VPN – OpenVPN (Example)
70