BEC MX-230 M1 User Manual page 13

LEDS /
INTERFACE
Gb ETH (1 & 2)
1
(Gigabit Ethernet)
LTE
2 (Received Signal
Strength Indicator)
3 Internet
4 Power
5 SIM Card Slot
BEC MX-230 M1 User Manual
ETH #1 Can be configured to be WAN port for broadband connectivity
Green
Red
Blinking
Off
Green
Green / Fast Flashing
Red / Fast Flashing
Red / Slow Flashing
Red
Off
Green
Red
Off
Green
Red
N/A
MEANING
Ethernet LAN: Connected to a Gigabit (1000Mbps) Ethernet
device
Ethernet WAN (ETH1 Only): Successfully connected with a
broadband connection device
Transmission speed is at 10/100Mbps
Data being transmitted/received
No device is connected to the Ethernet port
RSSI greater than -69 dBm. Excellent signal condition
RSSI from -81 to -69 dBm. Good signal condition
RSSI from -99 to -81 dBm. Fair signal condition
RSSI less than -99 dBm. Poor signal condition
No signal and the 4G LTE module is in service
No LTE module or LTE module fails
IP connected, and traffic is passing through the device
IP request failed
Either in bridged mode or WAN connection is not present
System ready
Boot failure
Insert mini SIM card (2FF) with the gold contact facing down.
Push mini SIM card (2FF) inwards to eject it
* Power off the MX-230 M1 before inserting or removing the SIM
card
Product Overview
Device Description
8