Page 3
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE ONLINE USER MANUAL. Package Contents ✓ BEC 8700AXL the 802.11ac DSL Router * 1 ✓ This Quick Installation Guide * 1 ✓ Wi-Fi Antenna * 3 ✓...
DSL cable is unplugged Green Internet access is ready - IP has received successfully Blinking Data being transmitted / received INTERNET BEC 8700AXL is unable to get a public (WAN) IP address Either in bridged mode or WAN (DSL) connection is not ready...
BEC 8700AXL Multi-Service Wireless 11ac DSL Router Rear Panel Connectors PORT MEANING 1. Power ON/OFF Power ON/OFF switch 2. Power Jack Connect the supplied Power Adapter to this port Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable, for 3.
Quick Start Guide Hardware Connection Application Diagram Hardware Installation 1. Power Connection Plug in the supplied power adapter to the wall jack, the other side to the 8700AXL then power ON the 8700AXL by pressing the Power On/Off button.
Page 7
BEC 8700AXL Multi-Service Wireless 11ac DSL Router 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface. 3. WAN Connection DSL Interface Connect the supplied a regular RJ-11 phone cable to the phone jack on the wall and the other end to the DSL port of the 8700AXL.
Page 8
Quick Start Guide EWAN Interface Connect RJ-45 Ethernet cable to the EWAN port, and connect the other side to another alternative broadband device, such as Cable Modem, VDSL, Fiber Modem or PON optic lines. <Please refer to User Manual for detailed instruction.> 4.
Page 9
BEC 8700AXL Multi-Service Wireless 11ac DSL Router 3G/4G LTE Modem Connectivity The USB 2.0 port supports 3G/4G LTE modem connectivity. Users can conveniently access Internet via 3G/4G LTE, eliminating the limitations of the wired network. This solution also employs an auto fail-over feature to ensure always-on connectivity for SOHO users.
Quick Setup Your Router Use the Quick Start for fast connection setup. Before start configuring your BEC 8700AXL, make sure you have the WAN port connected to phone jacks or with your Internet box or fiber line. Step 1: WAN Connection Setup Select the primary network interface for your Internet connection, xDSL/FTTH/3G_4G LTE mode.
Quick Start Guide Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User Manual. If you have other inquiries or need further technical support, please contact with your Internet Service Provider or visit us at www.bectechnologies.net. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.