BEC MX-230 M1 User Manual page 105

Device Configuration
100
Maintenance – Diagnostic Test
Click Back to go back to the Diagnostic Tool.
Trace Route is to display how many hops (also view the exact hops) the packet of data has to take to
get to the destination.
Click Yes, enter the IP address or domain then Start Trace Route.
IP Address or Domain: Set the destination host (IP, domain name) to be traced.
Max TTL value: Set the max Time to live (TTL) value.
Shown as we "trace"
www.billion.com below.
LAN
Ping other IP Address: Click Yes to ping any desired IP address or a domain.
Click START to begin to diagnose the connection.
Speed Time: Measure the current uplink and downlink speed rate.
 Take less than a minute to run the test.
BEC MX-230 M1 User Manual