Table of Contents
Advertisement
INTERFACE
GPS Antenna
1
Connector
2
RESET
3
POWER
WAN (MAIN/AUX)
1
4G/LTE Antenna
Connectors
BEC MX-230 M1 User Manual
SMA female connectors.
Manually screw the GPS antenna tight to the connector
After the device is powered on, press it 6 seconds or above: to restore to factory default
settings (this is used when you cannot login to the router, e.g. forgot your password)
Attach the power terminal block, 2-pin 3.5mm, or the power converter with 2-pin terminal
block here.
VCC (Left Connector): Power - Red Wire to connect to the Positive (+) terminal of the power
supply.
GND (Right Connector): Ground – Black Wire to connect to the ground of the power supply
SMA female connectors.
Manually screw the 3G/4G antennas tight to the female connectors for the Cellular Module
Product Overview
Device Description
MEANING
7
Advertisement
Table of Contents
