BEC MX-230 M1 User Manual page 72

 Protocol:
Select a protocol from the drop down list
 DSCP Marking:
DSCP Marking allows users to classify the traffic of the application to be executed according to
the DSCP value.
Rate Type: Choose Limited (Maximum) or Guaranteed (Minimum) to specify the date rate is allowed
for this policy.
 Rate: Specify the date rate in Kbps.
 Priority: Set
bandwidth. You can specify which application can have higher priority to acquire the bandwidth.
Its default setting is set to High. You may adjust this setting to fit your policy / application.
Internal IP Address: The IP address values for Local LAN devices you want to give control.

Internal Port: The Port number on the LAN side, it is used to identify an application.
External IP Address: The IP address on remote / WAN side.
 External Port: The Port number on the remote / WAN side.
Click Save to apply settings.
To Remove a Policy: Simply select the Index then hit the Delete button to remove from the list.
BEC MX-230 M1 User Manual
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte.
the priority given to each policy/application.
Device Configuration
Advanced Setup – QoS
Specify the priority for the use of
67