High-Speed Output Special Adapter Fx 3U -2Hsy-Adp - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Built-in Positioning Functions
2.5.6 High-Speed Output Special Adapter [FX
This section describes the output specifications of the high-speed output special adapter (FX
Item
Pulse output form
Load current
Maximum output frequency
Insulation
Cable length
1. Internal output circuit
High-speed output
special adapter
FX -2HSY-ADP
3U
Equivalent to
AM26C31
*2
SGA
Equivalent to
AM26C31
SGB *2
*1. To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
*2. The line between the SGA and the SGB is insulated.
PLC User's Manual - Positioning Control Edition
High-speed output special adapter (FX
Differential line driver system (equivalent to AM26C31)
25 mA or less
200KHz
Photocoupler and transformer insulate PLC from external lines of its outputs, and
transformer insulates each SG.
10 m, maximum
To connect to photocoupler:
Pulse train,
forward rotation pulse train
5V
Y0/2+
Y0/2-
Direction signal, reverse
rotation pulse train
5V
Y4/6+
Y4/6-
SGA
To connect to differential line receiver:
Pulse train,
forward rotation pulse train
5V
Y1/3+
Y1/3-
Direction signal, reverse
rotation pulse train
5V
Y5/7+
Y5/7-
SGB
-2HSY-ADP]
3U
Servo amplifier
Grounding
Servo amplifier
Grounding
2 Specifications
2.5 Output Specifications
-2HSY-ADP).
3U
-2HSY-ADP)
3U
(Drive unit)
*1
(Drive unit)
*1
B - 39
A
B
Apx.