Fx 3U Plc - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Common Items
2.4 FX PLC
3U
FX PLC
3U
A
A
FX -2HSY-ADP
3U
*1. The relay output and triac output type PLCs do not have pulse output.
*2. The product connects with the servo amplifier via the terminal block, MIL connector (20 pins), or the
SSCNET dedicated connector.
*3. FX -20SSC-H only connects with the servo amplifier applicable to SSCNET III.
3U
Note:
• For details on the connectable special function units/blocks and system configuration, refer to the following
manual.
A - 10
PLC User's Manual - Positioning Control Edition
A and
B
(For details of installation, refer to the manuals of special adapter and
special function units/blocks.)
Transistor output (Y000 to Y002)
Transistor output (Y000 to Y002)
B
Special function block
Special function unit
B show the unit positions.
Terminal board (M3)
*1
European terminal
*1
POWER
ERROR
START
DOG
PGO
X0
FX -10PG FP
X1
2N RP
f A
f B CLR
Terminal board (M3)
MIL connector (20-pin)
SSCNET III dedicated
For details, refer to the FX
Refer to the FX
2 Unit Connection
Servo motor
Stepping motor
board
*2
*2
connector
*2
-20SSC-H USER'S MANUAL.
3U
Hardware Edition.
3U
2.4 FX3U PLC
*3
or